焊管防銹管
Anticorrosion pipe is a kind of pipe which is used to prevent corrosion and rust. It is mainly used in the fields of oil and gas, chemical industry, pharmaceutical, food, etc. The anticorrosion pipe is made of alloy steel pipe and stainless steel pipe. The anticorrosion pipe is divided into various forms, such as plastic coated pipe, three layer PE pipe, three layer PP pipe, etc. The anticorrosion pipe is mainly used to prevent corrosion and rust of the pipeline. It is also used in the fields of oil and gas, chemical industry, pharmaceutical, food, etc. The anticorrosion pipe can be divided into two types: hot melt anticorrosion pipe and cold melt anticorrosion pipe. The hot melt anticorrosion pipe is mainly used for oil and gas pipelines, chemical pipelines, etc., while the cold melt anticorrosion pipe is mainly used for water pipelines, sewage pipelines, etc.
1表面處理:對焊接部位進行打磨除銹
2用抹布清潔表面
3對涂料進行徹底的攪拌,確認沒有沉淀
4采用羊毛刷,在焊縫部位刷涂羅巴魯冷鍍鋅涂料
5干燥以后確認涂膜厚度是否大于80微米
對于焊管除銹和防銹,最好的就是拋丸除銹,也有人叫噴砂除銹。這是采用電機帶動葉輪葉片將高速旋轉的鋼丸拋射到工件上打擊工件,從而使工件表面的鐵銹迅速脫落,顯露工件原來本色。一分鐘可以清理一米到五米。江蘇鑫磊拋丸機袁中明為您解答
看使用要求,如有特殊要求的可以在生產時涂抹防銹油,冷卻用皂化液,可以起到防銹作用,包裝時用塑料薄膜進行包裝。如生產后可進行酸洗,拋丸處理,噴砂處理三種方式。
1,對于已經焊接好的管路,一般建議在試驗過程中添加氣化性防銹液,也就是直接和水混合添加即可,對氣液兩相都有防銹作用,可以排放也可以不排。鍋爐行業普遍采用的這種方式。
2,對于沒有焊接的管材原料,如果是大型管材,一般向內噴涂氣化性防銹份即可。小型細管,比較難處理,可以內置其他氣化性防銹材料。
如有問題,請見頭像或資料。